1. Adjustable frequency: 5MHz-55MHz for sending and receiving 2. VSWR less than 1.5 at 7MHz/10MHz/14MHz/21MHz 3. Power: within 30W 4. FM 76mhz-108mhz reception 5. Can receive UHF VHF frequency, with transmission auxiliary function 6. Use the knob to adjust the frequency, and the band switch to select the short-wave high and low bands 7. Stretched size 140cm/55.1in (including tuner) 8. Material: stainless steel 9. Top with M4 male connector, output M male or BNC male connector 10. Unstretched size: 30cm (including tuner) 11. Tuner size: 10x3x3 cm
Instructions: 1. The upper knob is the band switch of each frequency, and the lower knob is the fine-tuning of the frequency vibration point. The upper outer ring 11 and the inner ring 50 represent the general position of 11-50MHz. 8 and FM represent the 8Mhz and FM bands. This can be used position, and so on. Then select the knob below to fine-tune to find the standing wave. It is recommended to link the genius to check the vibration point 2. Extended use method: remove the rod antenna, connect a 20-meter long line, set up the long line high or on the roof, the tuning method is the same as above, and the emission efficiency will increase several times. This method can replace the rod antenna
Package Included: - Tuner x 1 - Antenna x 1 - Adapter x 1
